Display and advertising inflatable flag introduction:sizecolorweightinflation timeproduction timepackingshipping time6mstandard or customized5kg3 mins7 days25X23X20cm3~5 days8m7kg5 mins7 days30X30X20cm10m9kg7 mins7 days35X35X20cmThere are three heights of inflatable flags , 6 meters, 8 meters, 10 metersTwo kinds of inflatable flag surface, single-sided printing inflatable flag surface, double-sided printing inflatable flag surface.Flagpole of inflatable flag: Stock color flagpole, such as black, white, red, blue and grayPrinting flagpoles, monochrome printing specified by the customer, too complex colors cannot accept printingThe base of inflatable flag, generally a water bag, is used to add weight to the flag. If the customer has special requirements or has its own better weighting method, it is not necessary to choose the base.Accessories: Usually ropes and ground nails, but because there is a water bag, the ground nail can only be fixed on the water bag.Electric pump: The voltage of each country is different. The salesman will prompt which voltage electric pump to choose from different countries. The electric pump can be used to inflate or deflate, which can save installation and packing time.The printing method is generally thermal transfer. If it is single-sided printing, it is very simple. One side is printed and the other side is not printed. If it is double-sidedprinting, an extra layer of opaque cloth will be added in the middle to prevent the printing on both sides from affecting the appearance.Inflation time for display inflatable flag: Generally 3~5 minutes, find the position of the air nozzle and connect the electric pump.TPU patch: If the inflatable flagpole is leaking, you can use the TPU patch to repair it, tear off the paper, and paste it on.
Many customers ask us if we could add lights to KCCE inflatable TPU tents, so that the KCCE inflatable advertising tents will look more beautiful and attractive. We know that many suppliers in the market have added LED lights to the inside of the inflatable tent leg TPU bladder at the request of customers, but we have heard that the risk of air leakage in the inflatable TPU tent tubes with LED lights is very high. We are not sure if this is true, or whether the customer actually had such a problem after purchasing from another factory who made the inflatable TPU tent with LED lights . Therefore, we made our own inflatable TPU tent tubes with lights. We tested it and found that factories that can add lights to the inflatable TPU tent of inflatable tents did take it seriously, but we didn’t think it was necessary.1. Inflatable TPU tent tubes with LED lights, there must be friction between the light and the TPU bladder. Whether it is adding an LED light strip to the TPU or adding a light strip between the tube cover fabric and the TPU bladder, there will be friction, and If only add LED bulbs to the bottom of the tubes of the inflatable TPU tent, the lighting will not be even, only the bottom will be brighter and the top of the tubes will be darker.2. Both the light strip and the bulb will heat up, which will accelerate the oxidation of TPU and tube cover fabric3. During packaging or transportation, if the LED light strip or bulb is damaged, it will increase the difficulty of replacement. The biggest advantage of this inflatable TPU tent is easy operation and replacement So we made the samples, analyzed them, and finally decided not to produce tent tubes with LED lights. If lighting is necessary, we recommend that customers purchase our LED panel lights, or customers can purchase ordinary lighting lights to hang on the top of the inflatable TPU tent, but the weight should not exceed 3KG.
The role of the inflatable bucket/barrel is to add weight to the tent,Generally, a tent needs to be equipped with 4 inflatable buckets/ barrels.as long as it is filled with water after inflation, the capacity is 6L, and the weight after weighting is 8KG.In addition, the bucket/barrel is made of PVC tarpaulin and TPU bladder, which can bear a weight of less than 200KG, so it can also be used as a stool.The storage of the inflatable bucket is very simple. It can be used when it is inflated. After adding water, it can be seated. It can be connected to the tent with a D button to fix the tent. After deflating, fold it and take it away.Of course, this product can not only fix or increase the weight of our tents, but also apply to aluminum frame tents and all inflatable tents of KCCE.In addition, many customers also use it as an advertising chair, because the jacket can print advertisements. The jacket can also be changed for different scenes or advertising themes.