|inflatable bar desk II size||L118XW54XH100cm|
|inflatable bar desk II material||Neoprene+TPU bladder|
|printing||heat transfer printing|
|production time||5-7 days|
Sizes of Bar Desk II
1)Open the box and check everything is included, Locate the instruction book.Locate the local plug pump to inflate it.
2)Open the desk, keep it laid out smooth when expanded.
3)Hold the TOP PVC board when inflate it to ensure the air go up straightly.
4) Turn on the LED light with remote controller if needed.
5)Dont't disassemble the product when it works well.
6)Install the power supply, ensure it is safely setup to local voltage and current settings. pay close attention to electrical safety, ensuring wires are not frayed or damaged in any way, Make sure all power supply and wires do not obstruct pedestrian in order to avoid any accidents.
7)When the desk is fully inflated with air stand straightly on the ground, screw up the valve cap.
A)Select an open area with plenty of space. pay special attention to ensure the product is not in the vicinity of the transformer (or exposed near overhead high-voltage cables).
B)Do not use the product in rainy or windy weather conditions .lf encounter heavy rain, ensure to cut off the power supply and remove the air pump. After the rain has stopped and inflatable products are dry with no moisture, the pump can be re-attached,reconnected to power supply and used again in dry conditions.
C) Working conditions: Temperature 50 degrees C, humidity 80%, wind speed below 5 of Beaufort Scale.
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.